一款均衡器：EQP-1A，这款均衡器专为多声道信号设计，最多可支持16声道沉浸声。
EQP-1A基于上世纪六十年代的经典程序均衡器，原始均衡器最出名的就是它的共振架，可以同时提升和衰减相同的频率。EQP-1A忠实模拟了原始硬件的变压器和电子管放大电路。
EQP-1A专为宽带均衡设计，提供四个低频提升/截止频率、三个高频截止频率和七个高频提升频率点，带宽控制用于塑造高频提升曲线。
EQP-1A专为MS、LR和Object、Bed等声道配置设计的，多声道均衡一直都和繁杂的路由息息相关，这款插件可以帮助用户节省大量的时间，绕开繁琐的手动路由均衡。
BUBBiX | 22 June 2024 | 21.3 MB
EQP-1A Immersive Program Equalizer
Save time and avoid tedious manual workarounds with EQP-1A, Classic Program Equalizer plugin designed from the ground up for fast, efficient work on mid/side, stereo and the objects, the beds (fixed channels) of immersive mixing environments.
The EQP-1A based on Classic Program Equalizer from the ’60s, original EQ is renowned for its unique ability to boost and cut the same frequencies simultaneously, thereby creating a resonant shelf, the EQP-1A faithfully models the overbuilt transformers and complex tube amplifiers of the original hardware.
SPECIFICATIONS
– 20, 30, 60, 100 Hz shelf boost;
– 20, 30, 60, 100 Hz shelf attenuate;
– 3, 4, 5, 8, 10, 12, 16 kHz peak boost;
– 5, 10, 20 kHz shelf attenuate;
– On/Off Analog Saturation;
– Dedicated workflows for immersive formats;
– Process entire grouped speaker zones using Channel Linking;
– 4 independent equalizers in one.
Conceived and created for broadband equalization, the EQP-1A features four low boost/cut frequencies, three high-cut frequencies and seven HF boost points, along with a bandwidth control for shaping the high boost curve.
Units
This module allows you to select an equalizer from four available. The equalizers are arranged in series, this allows you to process channels with different equalizers settings.
For example: the first EQ is only the mid channel, the second EQ is only the side channel, the third Eq is the left and right channel. For multi-channel modes: the first Eq is only the left and right channels, the second EQ is the center channel, the third EQ is the LFE, etc.
You can rename Unit Buttons for ease of use. To rename the selected Unit button, right-click on the button.
In order to turn on the solo (listen) of the equalizer, double-click on the selected equalizer number. The equalizer in solo mode glows yellow, to exit solo mode, double-click again. For two-channel modes, only one equalizer can be solo mode. For multi-channel modes, one or more equalizers can be soloed.
To bypass Eq processing, press the selected equalizer number one click + shift. In bypass mode, the button will glow red.
You can also copy all equalizer settings to another equalizer. To do this, select the equalizer from which you want to copy the settings, then click on the copy button, then select the equalizer to which you want to copy the settings.
Input Routing
Input Routing lets you choose between 44 common channel setups, starting from Stereo up to 7.1.4 and 9.1.6. Simply select in the input routing module the channel setup that fits your track.
You can also create your own input routing profiles. 16 independent channels are available.
Click on the edit button next to the input routing selection display. Hold down the shift button and select the desired number of channels. Name selected channels in order. Then click save and name the profile.
Channels Selection
In this module, you can select (activate) the channels that the equalizer (unit) will process.
From nfo
(64-bit: VST2, VST3, AAX)
(32-bit: VST2, VST3)
Whats new in this version
Official site does not provide any info about changes in this version.
System Requirements
Windows 7 or higher
Homepage
