Flux Pure Analyzer 1.9.23.44238 UNLOCKED | 64 MBFlux :: Pure分析仪系统是一种网络驱动的模块化RTA系统，可为任何可想象的音频分析和测量应用提供广泛的分析仪选项。
为了获得最大的灵活性和效率，Pure Analyzer提供了使用样本采集卡插件将信号采集与分析分离的选项，并且除了样本采集卡插件之外，Pure Analyzer还为ASIO和Core提供I / O支持。音频。
样品采集器
样品采集卡是一种标准的DAW插件，可用于所有常见格式（VST，AU，RTAS和TDM），该插件可获取源信号和响应信号，并使用ZeroConf / Apple Bonjour协议通过网络发送信号。
您可以根据需要在同一DAW，不同的DAW甚至完全不同的计算机上插入任意数量的Sample采集卡插件实例，并且Sample采集卡也支持环绕声配置。 Pure Analyzer系统的网络配置设置是完全自动的，对用户而言是透明的。
音频传输每个通道以44.1kHz的采样率大约需要1.4Mbps，因此正确配置的标准以太网100Mbps网络应该足以应付大多数情况。 96 kHz的5.1配置要求略低于20Mbps。当然，在同一硬件上同时使用样品采集器和分析仪时，这些要求也不适用。
纯分析仪必备
Pure Analyzer System的基础是一个独立的应用程序Pure Analyzer Essential，可以通过实时，计量/响度和环绕声分析模块进行扩展，并使用高效GPU的2D / 3D图形引擎执行图形分析渲染。该引擎基于OpenGL标准，利用内置图形卡上的GPU优化了视听体验。
Pure Analyzer Essential应用程序从样品采集器接收样品提要，并进行实时分析。 Pure Analyzer提供了一个选项，可以从网络上的多个不同的样品采集卡插件接收数据，并通过单击相应的实际样品采集卡作为当前分析源，从而并行分析接收到的数据。除此之外，还可以以简单的方式将来自物理ASIO /核心音频I / O的输入流选择为当前分析源。
附加模块
作为对Pure Analyzer Essential的补充，目前提供三个不同的附加模块，所有模块均针对其实际使用领域提供了特定的工具。为了使用任何附加模块，需要使用Pure Analyzer Essential。
可用的附加模块是：
-纯分析仪计量
-纯分析仪实时
-纯分析仪多通道
平台：WiN32 / 64
Flux.Pure.Analyzer.v1.9.23.44238.UNLOCKED-R2R
主页-http://www.fluxhome.com/
The Flux:: Pure Analyzer System is a network-driven modular RTA-system providing an extensive range of analyzer options for any imaginable audio analysis and measurement applications.
For maximum flexibility and efficiency, Pure Analyzer presents the option to separate the signal acquisition from the analysis utilizing a Sample grabber plug-in, and in addition to the Sample grabber plug-in, Pure Analyzer also provide I/O support for ASIO and Core Audio.
Sample Grabber
Sample grabber is a standard DAW plug-in available in all common formats (VST, AU, RTAS and TDM) that acquires the source and response signals and sends the signal through the network using the ZeroConf/Apple Bonjour protocol.
You can insert as many instances of Sample grabber plug-ins as required, on the same DAW, different DAWs, and even different computers altogether, and the Sample grabber also support surround configurations. The network configuration setup for the Pure Analyzer System is entirely automatic and transparent to the user.
The audio transport requires approximately 1.4Mbps for each channel at a sample rate of 44.1kHz, so a properly configured standard Ethernet 100Mbps network should be more than sufficient to handle most cases. A 5.1 configuration at 96kHz demands a little less than 20Mbps. Naturally these requirements do not apply when using both Sample grabber and analyzer on the same hardware.
Pure Analyzer Essential
The foundation of the Pure Analyzer System is a standalone application, Pure Analyzer Essential, which can be extended with modules for Live, Metering/Loudness and Surround analysis, performing the graphic analysis rendering using a GPU-efficient 2D/3D graphic engine. The engine is based on the OpenGL standard optimizing the audio-to-visual experience utilizing the GPU on the built in graphics card.
The Pure Analyzer Essential application receives the sample feeds from the Sample grabber and analyzes them in real time. The Pure Analyzer provides the option to receive data from several different Sample grabber plug-ins on the network, and analyze the received data in parallel by selecting the actual corresponding Sample grabber to be the current source for the analysis with a simple button click. In addition to this, the input streams from the physical ASIO/Core Audio I/O can also be selected as the current source for the analysis in the same simplistic fashion.
Add-on Modules
As a complement to the Pure Analyzer Essential, three different add-on modules, all providing specific tools for their actual field of usage, are currently available. In order to use any of the add-on modules, the Pure Analyzer Essential is required.
Available add-on modules are:
– Pure Analyzer Metering
– Pure Analyzer Live
– Pure Analyzer Multichannel
PLATFORM : WiN32/64
Flux.Pure.Analyzer.v1.9.23.44238.UNLOCKED-R2R
Home Page – http://www.fluxhome.com/
