PSPaudioware 推出一款多功能全面的延迟效果插件PSP 608 MultiDelay更新，每个抽头都有可选的反馈、立体声图像和位置、延迟时间、多模滤波器、调制、驱动/磁带饱和和混响。此外，反馈和驱动可以放置在信号链的开头或结尾，以获得更多的声音设计选项。调制部分由 LFO 和包络跟随器组成，磁带饱和算法取自 PSP 著名的母带处理器。当然，所有这些都可以在任何位深度和高达 24 位、192kHz 的采样率下完成，并且可以通过 MIDI 和任何主机音序器完全自动化。
PSPaudioware PSP 608 MultiDelay 1.x | 13.2 MB
PSP 608 MD可能是市场上功能最齐全的延迟插件(Mac OSX通用二进制的VST, AudioUnit, RTAS和AAX格式和Windows的VST, AAX和RTAS格式)。我们努力为您提供一个创造性的工具，不仅是功能性的，但鼓舞人心的。每个抽头都有可选择的反馈，立体声图像和位置，延迟时间，多模滤波器，调制，驱动器/磁带饱和和混响。此外，反馈和驱动器可以放置在信号链的开始或结束，以获得更多的声音设计选项!调制部分由LFO和包络从动器组成，磁带饱和算法取自我们著名的母带处理器。当然，这一切都可以在任何位深度和采样率高达24位，192kHz，并完全自动化通过MIDI和任何主机音序器。
特性
-每个通道最多8秒的延迟时间
-连续控制延迟时间在毫秒和/或选择精度的注意
-三种操作模式:多延时，其中每个抽头都有自己的反馈缓冲区;多点点击，其中主反馈操作在一个(用户可选择)点击;和MultiFB，其中开关分接关闭，而不是关闭反馈信号
-每个抽头包括以下独立调整:增益，立体声场宽度和平衡，延迟时间，滤波，调制，饱和模拟和混响
-每个抽头可以选择多个四重双二次滤波器类型，包括:低通，带通，高通，峰值滤波器和四个Shelf滤波器
-调制部分(LFO和包络从动器)提供3倍频的可调调制深度，并可选择滤波器截止
-基于母带处理器中使用的算法，具有可调增益的磁带饱和模拟
-反馈中的滤波模块包括LP, BP, HP滤波器(状态变量滤波器或Biquad)，具有可调截止和谐振
-复古混响模块忠实模拟弹簧和板混响
-支持采样率高达192kHz
-主机和MIDI自动化的所有处理
PSP 608 MD is perhaps the most fully featured delay plug-in available on the market (VST, AudioUnit, RTAS and AAX format for Mac OSX Universal Binary and VST, AAX and RTAS format for Windows). We have striven to offer you a creative tool that is not only functional, but inspiring. Each tap has selectable feedback, stereo image and position, delay time, multimode filter, modulation, drive/tape saturation, and reverb. Moreover, the feedback and drive can be placed at the beginning or end of the signal chain for even more sound design options! The modulation section consists of both an LFO and Envelope follower, and the tape saturation algorithm is taken from our renowned mastering processors. And of course all this can be done at any bit depth and sample rate up to 24-bit, 192kHz, and be fully automated via MIDI and any host sequencer.
Features
– Up to 8 seconds of delay time per channel
– Continuous control over the delay time in milliseconds and/or chosen quantize note
– Three operation modes: Multidelay, in which each tap has its own feedback buffer; Multitap, in which the Master Feedback operates on one (user selectable) tap; and MultiFB, where switches the tap off not switch the feedback signal off
– Each tap included independent adjustment of the following: gain, stereo field width and balance, delay time, filtering, modulation, saturation simulation and reverberation
– Each tap can choose between multiple quadruple biquadratic filter types, including: Low Pass, Band Pass, High Pass, PEAK filter and four Shelf filters
– Modulation section (LFO and envelope follower) offer adjustable modulation depth of 3 octaves, and can be selected for filter cutoff
– Tape saturation simulation with adjustable gain based on the algorithm used in our mastering processors
– Filtering module in feedback includes LP, BP, HP filter (either State Variable Filter or Biquad) with adjustable cutoff and resonance
– Vintage reverberation module for faithful simulation of spring and plate reverbs
– Support for sample rates of up to 192kHz
– Host and MIDI automation of all processing
PSPaudioware.PSP.608.MultiDelay.v1.6.1.R2.Incl.Keygen-R2R
Home Page – http://www.pspaudioware.com/
