File Size : 14.5 MB
Verberate 2具有革命性的生动霍尔算法
当涉及到混响时，它说明了声音质量。 Verberate是一种算法混响插件，可模拟具有非凡逼真的真实声学环境。第一个Verberate版本已经提高了标准。第2版引入了生动的霍尔算法，该算法增加了时间差异，从而避免了困扰基于卷积的混响的刚性，同时保留了Verberate 1的自然高密度混响尾音。
由于气流，表演者的移动或观众的动作，真实的声学环境将略有变化。尽管这些变化看起来很微妙，但对混响尾音末端的影响却很明显，因为在混响尾音消失之前，声音会被反射很多次。新的生动大厅算法可对这些随机变化进行建模，而不会产生合唱效果或音高变化等伪影，因此能够以更高的真实感模拟真实大厅的混响。
重点介绍
真实声学空间和机械板的高度逼真的模拟
生动霍尔算法的新时变超越了卷积
强大的衰减编辑器可实现与频率相关的混响时间
多功能集成输出均衡器
Restoration Suite 2是一套四个先进的插件，用于音频恢复和降噪：
DeNoise 2是一种插件，旨在减少风，噪声和相机噪声等噪声。在自适应模式下或在噪声曲线模式下测量噪声特性后，可以自动降低噪声。第2版中的新功能是动态噪声配置文件，可捕获噪声的动态属性，例如可以随时间波动的噪声（例如风噪声），可以有效降低噪声。新算法也得到了极大的改进，现在更不容易出现典型的降噪伪像了。
DeHum 2的目标是通常由接地不良的电气设备引起的嗡嗡声和嗡嗡声，而且还针对其他音调噪声源，例如电动机噪声。嗡嗡声检测算法在版本2中进行了改进，现在具有一个新的“扫描”按钮，可以自动微调基本的嗡嗡声频率。
DeClick 2旨在消除脉冲噪声，例如咔哒声，crack啪声和重击声。这些失真在LP和78 RPM记录中经常遇到，但由于丢失或数据包失真，也会在数字记录中发生。 DeClick 2的重击减少功能也可以有效地用于带有不必要爆破音的人声录音。该算法在版本2中得到了改进，现在不大可能减少所需信号中的攻击和瞬变。
DeClip 2使用改进的算法恢复因模拟或数字剪辑而失真的音频记录。
最新消息
版本2的新功能
与版本1相比，所有四个插件在处理算法和用户界面上均取得了重大改进。DeNoise2引入了新颖的动态噪声配置文件，可帮助减少随时间随机变化的噪声，例如风声或领夹式麦克风的沙沙声。 。在早期版本仅捕获具有时间恒定噪声水平的静态噪声打印的情况下，动态噪声配置文件捕获了要减少的噪声的统计信息。然后，噪声抑制算法使用测得的统计数据来估算最适合噪声输入信号的噪声阈值曲线DeNoise 2，DeClick 2和DeHum 2现在支持中/边（M / S）处理，从而可以减少立体声中不必要的波动图片。 DeClick 2中的核心算法得到了重大改进，现在可以更好地保留瞬态，并且可以在不引入伪影的情况下提高喀click声和crack啪声灵敏度。DeHum 2具有一个新的自动微调按钮，可以触发嗡嗡声频率的自动估计。嗡嗡声跟踪和抑制也得到了改善。 DeClip 2在音频质量方面得到了改进，现在可以提供更令人印象深刻的削波信号峰值重建。套件中的所有插件现在都支持高达7.1.6声道的环绕声和身临其境的音频格式。
Acon Digital Restoration Suite 2在Windows和Mac上均可作为VST，VST3或AAX使用，对于Mac则作为AU插件使用。 Windows有32位和64位版本，而Mac版本是64位。
Verberate 2 with the Revolutionary Vivid Hall Algorithm
When it comes to reverb, it’s all about the sound quality. Verberate is an algorithmic reverb plug-in that simulates real acoustical surroundings with exceptional realism. The first Verberate version already raised the bar. Version 2 introduces the Vivid Hall algorithm that adds time variance to avoid the stiffness that plagues convolution based reverbs while preserving the natural high density reverb tails of Verberate 1.
Real acoustical surroundings will have slight variations due to air currents, moving performers or movements in the audience. While these variations may seem subtle, the effect towards the end of the reverb tail is significant, since the sound is reflected a large number of times before the reverb tail fades out. The new Vivid Hall algorithm models these random variations without artifacts like chorus effects or pitch changes, and is therefore capable of simulating reverberation of real halls with a higher degree of realism.
Highlights
Highly realistic simulation of real acoustical spaces and mechanical plates
The new time variant Vivid Hall algorithm goes beyond convolution
Powerful decay editor allows frequency dependent reverb times
Versatile integrated output equalizer
Restoration Suite 2 is a suite of four cutting edge plug-in for audio restoration and noise reduction:
DeNoise 2 is a plug-in designed to reduce noise such as hiss, wind noise, buzz and camera noise. The noise can be reduced automatically in the adaptive mode or after measuring the characteristics of the noise in the noise profile mode. New in version 2 are dynamic noise profiles that capture the dynamic properties of the noise so that noise that fluctuates over time, such as wind noise, can be effectively reduced. The new algorithm has also been greatly improved and is now even less prone to typical de-noising artifacts.
DeHum 2 targets hum and buzz typically introduced by poorly grounded electrical equipment, but also other tonal noise sources like electrical motor noise. The hum detection algorithm has been improved in version 2 and there’s now a new Scan button that automatically fine tunes the fundamental hum frequency.
DeClick 2 is designed to remove impulsive noise such as clicks, crackle and thumps. These distortions are frequently encountered on LP and 78 RPM records, but also occur in digital recordings due to drop-outs or distorted data packets. DeClick 2’s thump reduction works also effectively on vocal recordings with unwanted plosives. The algorithm has been improved in version 2 and is now less prone to reducing attacks and transients in the wanted signal.
DeClip 2 restores audio recordings distorted by analog or digital clipping with an improved algorithm.
All four plug-ins have received major improvements both in the processing algorithms and the user interface compared to version 1. DeNoise 2 introduces the novel dynamic noise profiles that help reducing noise that varies randomly over time, such as wind noise or rustle from lavalier microphones. Where the earlier versions merely captured a static noise print with time-constant noise levels, the dynamic noise profiles capture statistics from the noise to be reduced. The noise suppression algorithm then estimates the most suitable noise threshold curve for the noisy input signal using the measured statistics.DeNoise 2, DeClick 2 and DeHum 2 now support Mid/Side (M/S) processing, which can reduce unwanted fluctuations in the stereo image. The core algorithm in DeClick 2 received major improvements and now better preserves transients and can be pushed to higher click and crackle sensitivities without introducing artifacts.DeHum 2 has a new automatic fine-tune button that triggers automatic estimation of the hum noise frequency. The hum tracking and suppression have also been improved. DeClip 2 was improved in terms of audio quality and now offers even more impressive reconstruction of clipped signal peaks. All the plug-ins in the suite now support surround and immersive audio formats up to 7.1.6 channels.Acon Digital Restoration Suite 2 is available as VST, VST3 or AAX for both Windows and Mac or as AU plug-ins for Mac. There are 32 and 64 bit versions for Windows and the Mac version is 64 bit.
