Togu Audio Line TAL-J-8 v1.2.5 Regged READ NFO-R2R | 7 MB
TAL-J-8是对80年代流行的硬件合成器的非常精确的仿真，并在我们自己的Jupiter 8设备之后进行了校准。所有声音都是实时生成的，无需使用具有相同无限调制可能性的任何样本（例如硬件）和有用的附加功能（例如可以使滤波器尖叫的校准部分）。
特征
80年代硬件合成器的真实仿真。
将校准部分用于极端共振和滤波器过载。
基于VCO的UNISON，具有立体声扩展选项和完整的立体声信号路径。
MPE支持。
solidtrax，emptyvessel等提供了200多种出厂预设。
经过我们的硬件设备校准。
[b] [更改日志版本1.2.5
修复1.2.4后可能出现的崩溃。
已添加VCO-1同步选项。/b]
正如我们在1.2.2版NFO中所述，由于注册rouine仍然无效，
我们放置了有效的注册文件，而不是提供keygen。许可证可以是
如果您知道如何，也可以在Mac和Linux中使用。当开发人员修复错误后，我们开始
再次释放。
我们的序列号只是一个字符“ 1”。在目前的越野车中有效
注册:)只需安装即可享受！
The TAL-J-8 is a very accurate emulation of the popular 80’s hardware synthesiser and calibrated after our own Jupiter 8 device. All sounds are generated in realtime without the use of any samples with the same endless modulation possibilities like the hardware and useful additional features like the calibration section that can make the filter scream.
FEATURES
Authentic emulation of the 80’s hardware synthesizer.
Use the calibration section for extreme resonance and filter overdrive.
VCO based UNISON with stereo spread option and a full stereo signal path.
MPE support.
More than 200 factory presets by solidtrax, emptyvessel and others.
Calibrated after our hardware device.
[b][CHANGE LOGVersion 1.2.5
Possible crash introduced with 1.2.4 fixed.
VCO-1 sync option added./b]
Because registration rouine is still broken as we explained in v1.2.2 NFO,
we put valid registered file instead of providing keygen. The license can be
used from Mac and Linux too if you know how to. When dev fix the bug, we go
to keygen release again.
Our serial number is just one character “1”. It’s valid in current buggy
registration :) Just install and enjoy!
