Baby Audio Smooth Operator VST VST3 AU AAX v1.0.0 MAC/WiN MAC | WiN x86 x64 – 18 MB
认识您的新混音助手
Smooth Operator将均衡，频谱压缩和共振抑制结合在一起，带来了即时，直观的独特创意体验。用它来完善您的色调平衡，并添加一点“ HiFi”。
我们的频谱检测算法每秒可适应您的音频44,100次，并自动消除疲劳的频率。这使您可以完全控制信号的形状并带出更多的清晰度。
强调
–使乐器，人声和混音母线更加清晰，流畅。
–允许创造性的音调成形，没有伪影或剧烈的共鸣。
–智能算法，可自动检测并解决疲劳的频率。
–在一个统一的工作流程中替代EQ，压缩和共振抑制。
工作流程
1-向下拉中间的圆圈以增加效果等级。即使是一条直线曲线，Smooth Operator也会自动首先攻击最主要/疲劳的频率。您可能不需要做更多的事情。
2-移动4个外部节点以形成音调响应。通过向上移动节点来保留频率区域，或者通过将其拉下来移除频率内容。使用鼠标滚轮或触控板滚动来调整Q。
3- FOCUS控制平滑操作员的手术方式。在100％时，每个频率尖峰都是独立处理的。较低的焦点值将使您获得更广泛，更平衡的响应。
4-在节点悬停期间让SOLO分别试听频谱的不同部分。
5-启用“侧链”模式，使混音中另一条轨道的频率平衡避免信号出现。此功能本来可以是一个插件（！）。它使您可以创建超手术侧链效果，在该效果中，可以使用引导轨道的精确频率组成来回避辅助轨道。
什么是光谱处理？
理解频谱处理的最简单方法是将其视为处理构成数字信号（而不是实际信号）的构建块。我们的算法使用快速傅立叶变换（或FFT）将输入的音频分解为细小颗粒，然后将它们单独分析和处理，然后再放回原处。所有这些都是实时发生的，与传统的音频效果相比，它可以通过更多的外科手术方法来进行共振检测和再平衡。
尽管大多数频谱工具都专注于音频恢复，但我们希望“平滑运算符”完全与创意表达有关。该插件用于调整您的语气。使用它可以在一个简单的过程中进行压缩，均衡和“净化”-并且知道在自动消除伪影方面，Smooth Operator会为您效劳。
预设
Smooth Operator带有由BABY Audio的朋友创建的63个预设，其中包括：
–普雷斯顿·里德（Ciara，托尼·布拉克斯顿，利尔·乌兹·维尔特）
–大卫·纳卡吉（David Makaji）（邮政马龙，阿米内（Aminé）和莉尔·埃扎伊（Lil Eazzyy））
– Rob Kleiner（大卫·奎塔，新航，小甜甜布兰妮，乔治·莫罗德）
– Neenah（Winne，Probz先生，Nana Fofie，Joe Budden）
显示选项
–在三种颜色模式之间切换（粉红色/绿色/蓝色）
–插件窗口完全可调整大小
兼容性
插件格式：VST，VST3，AU，AAX
支持的平台：Mac OS 10.7及更高版本，包括Catalina和Big Sur。 PC Windows 7及更高版本
支持的DAW：Ableton Live，Pro Tools，Logic Pro，FL Studio，Cubase，Nuendo，Reaper，Reason和更多内容
Meet your new mix assistant
Smooth Operator combines equalization, spectral compression and resonance suppression into a singular creative experience that’s instant and intuitive. Use it to perfect your tonal balance and add a touch of ‘HiFi’.
Our spectral detection algorithm adapts to your audio 44,100 times per second and automatically eliminates fatigued frequencies. This gives you full control to shape your signal and bring out more definition.
HIGHLIGHTS
– Brings out clarity and smoothness across instruments, vocals and mix busses.
– Allows for creative tone shaping without artifacts or harsh resonances.
– Intelligent algorithm that automatically detects and resolves fatigued frequencies.
– An alternative to EQ, compression and resonance suppression in one unified workflow.
WORKFLOW
1- Pull the middle circle down to increase the effect level. Smooth Operator automatically attacks the most dominant/fatigued frequencies first, even with a straight curve. You may not need to do more than this.
2- Move the 4 outer nodes to shape the tonal response. Preserve frequency areas by moving the nodes up, or remove frequency content by pulling them down. Use your mousewheel or trackpad-scroll to adjust the Q.
3- FOCUS controls how surgical Smooth Operator gets. At 100%, each frequency spike is processed independently. Lower focus values will give you a broader, more balanced, response.
4- Engage SOLO to audition different parts of the frequency spectrum separately during node hover-over.
5- Engage SIDE CHAIN mode to duck your signal with the frequency balance of another track in your mix. This feature could have been a plugin in its own right(!) It allows you to create a hyper-surgical side chain effect where the exact frequency make-up of a lead track can be used for ducking a secondary track.
What is spectral processing?
The easiest way to understand Spectral Processing is to think of it as manipulating the building blocks that make up a digital signal – rather than the actual signal. Our algorithm uses Fast Fourier Transform – or FFT – to break the incoming audio into tiny particles, which are analyzed and processed separately, before being put back together again. This all happens in realtime and allows for a much more surgical approach to resonance detection and rebalancing than what would be possible with traditional audio effects.
While most spectral tools focus on audio restoration, we wanted Smooth Operator to be all about creative expression. The plugin is meant for shaping your tone. Use it to compress, EQ and ‘purify’ in one simple process – and know that Smooth Operator has your back when it comes to automatically eliminating artifacts.
PRESETS
Smooth Operator comes loaded with 63 presets created by friends of BABY Audio – including:
– Preston Reid (Ciara, Toni Braxton, Lil Uzi Vert)
– David Nakaji (Post Malone, Aminé, Lil Eazzyy)
– Rob Kleiner (David Guetta, Sia, Britney Spears, Giorgio Moroder)
– Neenah (Winne, Mr. Probz, Nana Fofie, Joe Budden)
DISPLAY OPTIONS
– Switch between three color modes (Pink / Green / Blue)
– Plugin window fully resizable
Compatibility
Plugin formats: VST, VST3, AU, AAX
Platforms supported: Mac OS 10.7 and up including Catalina and Big Sur. PC Windows 7 and up
DAWs supported: Ableton Live, Pro Tools, Logic Pro, FL Studio, Cubase, Nuendo, Reaper, Reason + more
