File Size : 14.5 MB
具有革命性生动霍尔算法的Verberate 2
说到混响，最重要的是音质。Verberate是一个算法混响插件，模拟真实的声音环境与特殊的现实主义。第一个Verberate版本已经提高了标准。版本2引入了Vivid Hall算法，该算法增加了时间方差，以避免困扰基于卷积的混响的刚度，同时保留了Verberate 1的自然高密度混响尾。
真实的声学环境会有轻微的变化，由于气流，移动的表演者或观众的动作。虽然这些变化可能看起来很微妙，但对混响尾结束的影响是显著的，因为声音在混响尾消失之前被反射了大量的时间。新的Vivid Hall算法模拟了这些随机变化，没有合唱效果或音高变化等人工影响，因此能够以更高的真实感模拟真实大厅的混响。
突出了
高度逼真的模拟真实的声学空间和机械板
新的时变Vivid Hall算法超越了卷积
强大的衰减编辑器允许频率相关的混响时间
通用集成输出均衡器
修复套件2是一套四个尖端的插件音频恢复和降噪：
降噪2是一个插件，旨在减少噪音，如嘶嘶声，风的噪音，嗡嗡声和相机的噪音。在自适应模式下或在噪声剖面模式下测量噪声特性后，可以自动降低噪声。版本2中的新功能是动态噪声配置文件，它可以捕获噪声的动态特性，从而有效地减少随时间波动的噪声，例如风噪声。新算法也有了很大的改进，现在更不容易出现典型的去噪伪影。
DeHum 2的目标是嗡嗡声和嗡嗡声，通常是由接地不良的电气设备引起的，但也包括其他音调噪声源，如电动机噪声。嗡嗡声检测算法在版本2中得到了改进，现在有一个新的扫描按钮，可以自动微调嗡嗡声的基本频率。
DeClick 2旨在消除脉冲噪声，如咔哒声、噼啪声和砰砰声。这些失真经常在LP和78 RPM记录中遇到，但也会发生在数字记录中，由于丢失或扭曲的数据包。DeClick 2的重击减少也有效地处理了带有不需要的爆炸声的录音。该算法在版本2中得到了改进，现在不太容易减少攻击和所需信号中的瞬变。
DeClip 2恢复音频记录失真的模拟或数字剪辑与改进的算法。有什么新鲜事
第二版新增功能
与版本1相比，所有四个插件在处理算法和用户界面方面都得到了重大改进。DeNoise 2引入了新的动态噪声剖面，有助于减少随时间随机变化的噪声，例如风噪声或lavier麦克风的沙沙声。早期版本仅捕获具有时间常数噪声水平的静态噪声打印，而动态噪声配置文件捕获要减少的噪声的统计数据。然后，噪声抑制算法利用测量到的统计量估计出最适合噪声输入信号的噪声阈值曲线。DeNoise 2， DeClick 2和DeHum 2现在支持中/侧（M/S）处理，这可以减少立体图像中不必要的波动。DeClick 2中的核心算法得到了重大改进，现在可以更好地保留瞬态，并且可以在不引入伪影的情况下提高点击和裂纹灵敏度。DeHum 2有一个新的自动微调按钮，触发嗡嗡声噪声频率的自动估计。嗡嗡声跟踪和抑制也得到了改进。DeClip 2在音频质量方面得到了改进，现在提供了更令人印象深刻的剪切信号峰值重建。套件中的所有插件现在都支持环绕声和沉浸式音频格式，最高可达7.1.6声道。Acon Digital Restoration Suite 2可作为VST， VST3或AAX用于Windows和Mac，或作为AU插件用于Mac。Windows有32位和64位版本，Mac版本为64位。
Verberate 2 with the Revolutionary Vivid Hall Algorithm
When it comes to reverb, it’s all about the sound quality. Verberate is an algorithmic reverb plug-in that simulates real acoustical surroundings with exceptional realism. The first Verberate version already raised the bar. Version 2 introduces the Vivid Hall algorithm that adds time variance to avoid the stiffness that plagues convolution based reverbs while preserving the natural high density reverb tails of Verberate 1.
Real acoustical surroundings will have slight variations due to air currents, moving performers or movements in the audience. While these variations may seem subtle, the effect towards the end of the reverb tail is significant, since the sound is reflected a large number of times before the reverb tail fades out. The new Vivid Hall algorithm models these random variations without artifacts like chorus effects or pitch changes, and is therefore capable of simulating reverberation of real halls with a higher degree of realism.
Highlights
Highly realistic simulation of real acoustical spaces and mechanical plates
The new time variant Vivid Hall algorithm goes beyond convolution
Powerful decay editor allows frequency dependent reverb times
Versatile integrated output equalizer
Restoration Suite 2 is a suite of four cutting edge plug-in for audio restoration and noise reduction:
DeNoise 2 is a plug-in designed to reduce noise such as hiss, wind noise, buzz and camera noise. The noise can be reduced automatically in the adaptive mode or after measuring the characteristics of the noise in the noise profile mode. New in version 2 are dynamic noise profiles that capture the dynamic properties of the noise so that noise that fluctuates over time, such as wind noise, can be effectively reduced. The new algorithm has also been greatly improved and is now even less prone to typical de-noising artifacts.
DeHum 2 targets hum and buzz typically introduced by poorly grounded electrical equipment, but also other tonal noise sources like electrical motor noise. The hum detection algorithm has been improved in version 2 and there’s now a new Scan button that automatically fine tunes the fundamental hum frequency.
DeClick 2 is designed to remove impulsive noise such as clicks, crackle and thumps. These distortions are frequently encountered on LP and 78 RPM records, but also occur in digital recordings due to drop-outs or distorted data packets. DeClick 2’s thump reduction works also effectively on vocal recordings with unwanted plosives. The algorithm has been improved in version 2 and is now less prone to reducing attacks and transients in the wanted signal.
DeClip 2 restores audio recordings distorted by analog or digital clipping with an improved algorithm.
All four plug-ins have received major improvements both in the processing algorithms and the user interface compared to version 1. DeNoise 2 introduces the novel dynamic noise profiles that help reducing noise that varies randomly over time, such as wind noise or rustle from lavalier microphones. Where the earlier versions merely captured a static noise print with time-constant noise levels, the dynamic noise profiles capture statistics from the noise to be reduced. The noise suppression algorithm then estimates the most suitable noise threshold curve for the noisy input signal using the measured statistics.DeNoise 2, DeClick 2 and DeHum 2 now support Mid/Side (M/S) processing, which can reduce unwanted fluctuations in the stereo image. The core algorithm in DeClick 2 received major improvements and now better preserves transients and can be pushed to higher click and crackle sensitivities without introducing artifacts.DeHum 2 has a new automatic fine-tune button that triggers automatic estimation of the hum noise frequency. The hum tracking and suppression have also been improved. DeClip 2 was improved in terms of audio quality and now offers even more impressive reconstruction of clipped signal peaks. All the plug-ins in the suite now support surround and immersive audio formats up to 7.1.6 channels.Acon Digital Restoration Suite 2 is available as VST, VST3 or AAX for both Windows and Mac or as AU plug-ins for Mac. There are 32 and 64 bit versions for Windows and the Mac version is 64 bit.
