z3ro | 2023年1月30日| VST3 | 105 MB
神经Q给你的音乐一个非常“模拟”的声音顶部闪闪发光和“沉重”底部很少发现在插件均衡器。
模拟仿真的未来就在这里。这个插件忠实地捕捉动态行为和一个著名的复古德国均衡器和一个现代固态前置放大器cinemag变压器的声音。
把参数推到极限，然后被结果“惊呆”。
电路建模是一项过去的技术，永远无法产生像RNN(循环神经网络)那样真实的模拟仿真。
版本2有什么新功能?
•引入了新的AI / ML系统。
•CPU使用率远低于v1
•新的重制预设
•前放大器部分的再训练模型
•更精确地再现原始硬件单元
•调整大小选项
我们基于人工智能技术的新应用程序通过输入真实音乐材料样本来训练模拟设备的模型和参数。我们用人声、鼓、吉他、混音和其他乐器短语来训练系统。
然后，神经网络通过复制模拟齿轮对声音的“影响”来创建基于权重的模型。这将导致更精确的模拟行为。
特性
嗨乐队
这种控制提高了程序材料的高频率，使其保持被捕获的原始硬件的形状。
取值范围为- 15db ~ + 15db
罗带
这种控制提高了被捕获的原始硬件形状的程序材料的低频。
取值范围为- 15db ~ + 15db
前置驱动
此控件用于驱动模拟前置放大器部分的输入。我们用得越多，信号就越饱和。
驱动方式
这为前置放大器模块提供了3种类型的饱和。干净，中等，脏。不要害怕使用这个插件!
开/关按钮
此按钮可以绕过或激活插件的预放大器饱和模块。
输出
此控件是处理后的最终信号的输出微调，范围从-24dB到24db。
为了方便用户，在前置放大器部分实现了自动增益。
预设
一些预设在一些类别已经提供了让用户开始。
这个版本有什么新内容
官方网站没有提供关于这个版本的变化的任何信息。
系统需求
Windows 10及以上版本
主页
https://anonymz.com/…hop/neuralq-v2/
z3ro | 30 January 2023 | VST3 | 105 MB
Neural Q gives your music a very “analog” sounding Top-end sparkle and “heavy” bottom end seldom found in plugin equalizers.
The future of Analog Emulation is here. This plugin faithfully captures the dynamic behavior and sound of a well-known Vintage German Equalizer and a modern Solid State Pre-Amp featuring cinemag transformers.
Push the parameters to the limits and be “stunned” by the results.
Circuit Modelling is a technology of the past and can never produce as authentic an analog emulation as RNN (Recurrent Neural Networks).
What’s New in Version 2?
• Introduced a New AI / ML System.
• Much lower CPU usage than v1
•New Reworked Presets
• Retrained model of the preamp section
• More accurate reproduction of the original hardware units
• Resizing Option
Our new applications based on AI technologies, literally train a model and parameters of an analog device by feeding it samples of real music material. We train the system with vocals, drums, guitars, full mixes, and other instruments phrases.
The Neural Network then creates a model based on weights by replicating the “effect” of the analog gear on the sound. This results in more accurate analog behavior.
Features
Hi Band
This control boosts the high frequency of the program material in the shape of the original hardware that was captured.
The range is -15 dB to +15 dB
Lo Band
This control boosts the low frequency of the program material in the shape of the original hardware that was captured.
The range is -15 dB to +15 dB
Pre-Amp Drive
This control is used to drive the input of the analog pre-amp section. The more we use, the more saturated the signal.
Drive Type
This provides 3 types of saturation for the Pre-Amp Module. Clean, Medium, and Dirty. Don’t be afraid to push this plugin!
Drive on/Off Button
This button can bypass or activate the pre-amp saturation module of the plugin.
Output
This control is an output trim for the final signal after processing and the range is from -24dB to 24 dB.
Autogain has been implemented in the pre-amp section for the convenience of the user.
Presets
Some presets in a few categories have been provided to get the user started.
Whats new in this version
Official site does not provide any info about changes in this version.
System Requirements
Windows 10 or later
Homepage
https://anonymz.com/…hop/neuralq-v2/
