Kontakt 5/6 – 556 MB
Updated with new Kontakt 5 and Kontakt 6 Instruments, the latter makes use of the new Kontakt 6 delay and reverb
Cassetto背后的想法是创建一种合成器，该合成器具有陈旧且略有缺陷的声音以及相当固定但有趣的体系结构。最终的结果是一个合成器，它具有自己的特征，并具有一些非常独特的音调。尽管Kontakt通常用于复杂样本，但Cassetto使用采样振荡器，因此它是真正的合成器，并且所有声音的构建方式都与其他任何减法合成器相同，但它带有200个预设，并且还有更多的预设。
The Process
Firstly, I chose the Elektron Analogue Four for the Oscillators as it has a nice selection of strong analog waveforms. Each of the Raw Waveforms was then recorded note by note over 4 octaves onto a very old and well worn cassette. I have owned this cassette since at least 1987 as it had me playing guitar badly around that time, which was recorded over a Pet Shop Boys album funnily enough. It was the 3rd cassette I tried and had the most dropouts which is what I was looking for. This is the Cassette:
I had been looking for a suitable cassette deck for this project for a long while, and a friend came up with this one (JVC CD-1635 MK II) which is actually a really nice machine after bit of de-oxit, I’d already tried a couple of others with auto gain inputs which was a bit too extreme, I was after subtlety. Here is what it looks like (you can see the cassetto! cassette if you look closely).
These were then recorded into the computer through a focusrite OctoPre and each 4 second sample was looped manually at different lengths to provide the multisampled oscillators. I was actually surprised how lovely they sounded once tamed by Filters. This is what some of the raw unfiltered waveforms sound like with random start time (phase).
It also occurred to me that it might be interesting to use some single cycle loops from clean recordings of the A4, which would add a whole other dimension to the sound possibilities, so I did this for 5 of them, and they sounded good and added a nice contrast to the tape Oscillators. I then finished off the oscillators by creating some detuned and mixed groups of the single cycles. I also tried to be a bit imprecise with the looping of the single cycles to give them a slightly detuned broken oscillator sound, although it is subtle.
The Synth Engine
I created a soundset for Bassline-101, and whilst working on it, I really came to appreciate the simplicity of the SH-101 design and so in my head that was the starting point for Cassetto. As you can probably see it went way beyond that simplicity, but I tried hard to keep to the idea of making it hard to make bad sounds which is the strong point of the 101. I just can’t seem to keep things that simple…
My second thought was that I wanted it to be an instrument that Boards of Canada could use, I think out of any band they always seem to get sounds out of synths which is hard to describe, but to me always sound like childhood/Nostalgia. So, I had the cassette sampled oscillator, the next thing on my list was a way to warble the sound, a wow and flutter dodgy cassette sort of thing. On the synth it’s called Unstable (UNST) and it works very nicely to create that feel. Finally I wanted to get some subtle saturation and most importantly sample rate/bit rate reduction in there, which is not only great for emulating digital gear, but it can make sound take on characteristics of Mellotrons and acoustic instruments sometimes. After some experimentation I decided to place it in between the 2 filters which leaves the option of having either a Low Pass in slot 2 for grit, or a High Pass for Noise and it works really well.
Initially I started with hard wired Serial Filters, but after trying out splitting the filters one to each oscillator it opened a whole new world I couldn’t ignore, I followed that up with giving the ability to use the Filter envelope to control the Volume of Oscillator 2 and/or Noise. This just makes so many new sounds possible for the sake of a couple of buttons.
With the Arpeggiator I began by using the one I’d built for Multiverse, however I really wanted a Chord Mode and I ended up rebuilding it and so it does function slightly differently. It is basically a standard Arpeggiator with Sequencers grafted on, this can lead to some very complex polyrhythms. The other addition over the Multiverse ARP is the 16 note Pitch Sequencer which if you play a single Note behaves like a classic Sequencer.
Highlights
– 2 Oscillators with both multi-sampled cassette sampled sound and single cycle Waveforms (100 selections in total)
– Noise Oscillator sampled from Tape
– Unstable for warbling the oscillator pitch
– Dual Filters with a large choice of filter types
– Parallel Filters or One for each Oscillator
– 3 LFOs with 30 selectable Waveforms, LFO1/2 reset on note on, LFO3 is free running
– Random LFO for the Filters
– Filter Envelope for the Cutoff, Pitch and Optional Volume of Oscillator 2
– VCA Envelope for Volume Control
– Envelope 3 assignable to Resonance LFO1 speed and LFO 3 level
– Reverb with 50 Impulse Responses
– Delay
– Modulator with a choice from Chorus, Flanger or Phaser
– Versatile Arpeggiator with Sequencers for various parameters plus 6 Modulation Sequencers
– various Chord Modes for the Arpeggiator
– various Mod Sequencer Modes
– Preset Browser with the ability to save presets
– Global Randomizer and Default, with the ability to save you own Default preset.
– Complete Microtuner System with 300+ Scales and scala support
– Scale Re-Mapper with 78 Scales
– Section Default and Randomizer buttons
– 400 Presets
You must have the full version of Kontakt 5.6 to use Cassetto or Kontakt 5.5 to use Micro Cassetto or the full version of Kontakt 6 to use new K6 Cassetto, they will not load in earlier versions. They will also only work for 15 minutes in the player.
