MOCHA | VST3/AAX | 7.9 MB
最高精度瞬态设计器。 分离瞬态和维持。
TranSplit 的工作原理是将音频信号分为瞬态信号和维持信号。 这种分离过程依赖于 TranSplit 确定频率优先级的能力，使其擅长处理从低音到高频的所有频率。 此外，TranSplit 还为用户提供了管理瞬态和维持之间平衡的能力。 这使得 TranSplit 成为混音鼓、吉他等以及声音设计的高度推荐插件。
触发
重点关注频率。
TranSplit 具有三种模式，可在信号处理阶段对频率进行优先级排序。
您可以选择强调低音、高音，或涵盖整个频段。
例如，此功能可以灵活地集中于底鼓、军鼓和通鼓，捕捉它们的瞬态，而不受镲片高音的任何干扰。
精确直观的控制
瞬态与维持之间的比率。
TranSplit 的设计考虑到了精确控制，尤其是音频瞬态部分和延音部分之间的关系。 它具有平衡参数，这是一个水平推子，可以让您对这两个组件之间的平衡进行精细控制。 通过将推子移至最左端，您可以隔离并强调瞬态，而将其移至最右端则可将焦点转移到音频的延音部分。
一般的
分离瞬态和维持
调整瞬态和维持之间的比率
现场活动（音乐会/流媒体）的低延迟
实时查看每一个变化
特征
灵敏度：选择瞬态被检测到所需的强度
长度：控制每个检测到的瞬变的淡出持续时间
平衡推子：调整瞬态和延音之间的比例
模式
低音：专注于低音范围以检测诸如底鼓和军鼓之类的瞬态
高音：专注于高瞬态，如铙钹、人声等……
全部：全动态范围
Maximum precision transient designer. Split transients and sustain.
TranSplit works by dividing your audio signal into transients and sustain. This separation process relies on TranSplit ability to prioritize frequencies, making it adept at handling everything from bass to high frequencies. Furthermore, TranSplit provides users with the power to manage the balance between transients and sustain. This makes TranSplit an high recommended plugin vor mixing drums, guitars, etc. and for sounddesign.
The trigger
Focus on the frequency.
TranSplit features three modes that enable prioritization of frequencies during the signal processing phase.
You have the choice to either accentuate the Bass, the Highs, or encompass the entire frequency band.
For example, this feature provides the flexibility to concentrate on the kick, snare, and toms, capturing their transients without any interference from the highs of the cymbals.
Precise intuitive control
Ratio between transients and sustain.
TranSplit is designed with precise control in mind, particularly over the relationship between transient and sustain portions of your audio. It features the Balance parameter, a horizontal fader that gives you granular control over the equilibrium between these two components. By moving the fader to the hard left, you isolate and emphasize the transients, while shifting it to the hard right brings the focus onto the sustain part of your audio.
General
Separate transients and sustain
Adjust ratio between transients and sustain
Low latency for live events (concert/ streaming)
See every change in realtime
Features
Sensitivity: Choose the intensity a transient needs in order to be detected as such
Length: Control the fade out duration for each detected transient
Balance fader: Adjust the ratio between transient and sustain
Modes
Bass: Focus on bass range to detect transients like kick and snare
Highs: Focus on high transients like cymbals, vocals etc…
All: Full dynamic range
